Skip to content
HitLight
ACME · PAR

ACME LED-PAR 200

DMX chart, 3 DMX modes and a 3D preview. 1 / 2 / 3 DMX channels.

What it can do

  • Dimmer

DMX modes and channel charts

DMX modes of ACME LED-PAR 200
ModeChannelsIn HitLight
Mode3 1 DMX1Ready in HitLight
Mode2 2 DMX2Ready in HitLight
Mode1 3 DMX3Ready in HitLight

Mode3 1 DMX

Ready in HitLight

1 DMX channel · Download this chart as CSV

DMX channel chart for Mode3 1 DMX
ChannelFunctionDefaultDMX values
1Dimmer00–255

Mode2 2 DMX

Ready in HitLight

2 DMX channels · Download this chart as CSV

DMX channel chart for Mode2 2 DMX
ChannelFunctionDefaultDMX values
1Dimmer00–255
2Shutter1Strobe0
8 value ranges
  • 0–5 Open
  • 6–122 min Strobe
  • 123–123 max Strobe
  • 124–127 Open 2
  • 128–187 Strobe Ran1
  • 188–248 Strobe Ran2
  • 249–249 Strobe Ran3
  • 250–255 Open 2

Mode1 3 DMX

Ready in HitLight

3 DMX channels · Download this chart as CSV

DMX channel chart for Mode1 3 DMX
ChannelFunctionDefaultDMX values
1Dimmer00–255
2Dimmer Fine0Fine byte of Dimmer
3Shutter1Strobe0
8 value ranges
  • 0–5 Open
  • 6–122 min Strobe
  • 123–123 max Strobe
  • 124–127 Open 2
  • 128–187 Strobe Ran1
  • 188–248 Strobe Ran2
  • 249–249 Strobe Ran3
  • 250–255 Open 2

Use the ACME LED-PAR 200 in HitLight

  1. Open Add fixture and search for ACME LED-PAR 200.
  2. Choose the DMX mode set in the fixture’s own menu. HitLight gives it the lowest free start address on its universe that fits the mode’s channel count.
  3. Check the mode and controls against your real fixture before live use.

Charts come from the fixture’s GDTF description as converted for the HitLight library. HitLight is not affiliated with ACME.

Patch it, then let the music run the lights.

HitLight finds these fixtures in its library, patches them on the next free address and previews your rig in 3D before a single light is plugged in.

Open HitLight ↗Download HitLight