ACME STAGE PAR 100 IP CW (LED-PAR100 CW IP)
DMX chart, 3 DMX modes and a 3D preview. 1 / 2 / 3 DMX channels.

What it can do
- Strobe
- Dimmer
DMX modes and channel charts
| Mode | Channels | In HitLight |
|---|---|---|
| Mode1 1DMX | 1 | Ready in HitLight |
| Mode 2 2DMX | 2 | Ready in HitLight |
| Mode 3 3DMX | 3 | Ready in HitLight |
Mode1 1DMX
Ready in HitLight1 DMX channel · Download this chart as CSV
| Channel | Function | Default | DMX values |
|---|---|---|---|
| 1 | Dimmer | 0 | 0–255 |
Mode 2 2DMX
Ready in HitLight2 DMX channels · Download this chart as CSV
| Channel | Function | Default | DMX values |
|---|---|---|---|
| 1 | Dimmer | 0 | 0–255 |
| 2 | Shutter / Strobe | 0 | 8 value ranges
|
Mode 3 3DMX
Ready in HitLight3 DMX channels · Download this chart as CSV
| Channel | Function | Default | DMX values |
|---|---|---|---|
| 1 | Dimmer | 0 | 0–255 |
| 2 | Dimmer Fine | 0 | Fine byte of Dimmer |
| 3 | Shutter / Strobe | 0 | 8 value ranges
|
Use the ACME STAGE PAR 100 IP CW (LED-PAR100 CW IP) in HitLight
- Open Add fixture and search for ACME STAGE PAR 100 IP CW (LED-PAR100 CW IP).
- Choose the DMX mode set in the fixture’s own menu. HitLight gives it the lowest free start address on its universe that fits the mode’s channel count.
- Check the mode and controls against your real fixture before live use.
Charts come from the fixture’s GDTF description as converted for the HitLight library. HitLight is not affiliated with ACME.





