Skip to content
HitLight
Clay Paky · Moving head

Clay Paky Stage Color 300

DMX chart, 2 DMX modes and a 3D preview. 8 / 10 DMX channels.

Clay Paky Stage Color 300 rendered in HitLight

What it can do

  • Frost
  • RGB colour mixing
  • Dimmer

Safety-relevant functions: Fixture reset. Check how these behave on your own fixture before a show.

DMX modes and channel charts

DMX modes of Clay Paky Stage Color 300
ModeChannelsIn HitLight
8 bits8Ready in HitLight
16 bits10Ready in HitLight

8 bits

Ready in HitLight

8 DMX channels · Download this chart as CSV

DMX channel chart for 8 bits
ChannelFunctionDefaultDMX values
1Red00–255
2Green00–255
3Blue00–255
4Shutter1Strobe0
2 value ranges
  • 0–254 Close
  • 255–255 Open
5Pan1280–255
6Tilt1280–255
7Dimmer00–255
8Frost100–255

16 bits

Ready in HitLight

10 DMX channels · Download this chart as CSV

DMX channel chart for 16 bits
ChannelFunctionDefaultDMX values
1Red00–255
2Green00–255
3Blue00–255
4Shutter1Strobe0
2 value ranges
  • 0–254 Close
  • 255–255 Open
5Pan1280–255
6Tilt1280–255
7Dimmer00–255
8Frost100–255
9Pan Fine0Fine byte of Pan
10Tilt Fine0Fine byte of Tilt

Use the Clay Paky Stage Color 300 in HitLight

  1. Open Add fixture and search for Clay Paky Stage Color 300.
  2. Choose the DMX mode set in the fixture’s own menu. HitLight gives it the lowest free start address on its universe that fits the mode’s channel count.
  3. Check the mode and controls against your real fixture before live use.

Charts come from the fixture’s GDTF description as converted for the HitLight library. HitLight is not affiliated with Clay Paky.

Patch it, then let the music run the lights.

HitLight finds these fixtures in its library, patches them on the next free address and previews your rig in 3D before a single light is plugged in.

Open HitLight ↗Download HitLight