Skip to content
HitLight
DTS Lighting · PAR

DTS Lighting Fos 100 Power Jerome L VLS

DMX chart, 1 DMX mode and a 3D preview. 6 DMX channels.

DTS Lighting Fos 100 Power Jerome L VLS rendered in HitLight

What it can do

  • Extra LED colours
  • RGB colour mixing
  • Strobe
  • Dimmer

DMX modes and channel charts

DMX modes of DTS Lighting Fos 100 Power Jerome L VLS
ModeChannelsIn HitLight
6 CH6Ready in HitLight

6 CH

Ready in HitLight

6 DMX channels · Download this chart as CSV

DMX channel chart for 6 CH
ChannelFunctionDefaultDMX values
1Shutter / Strobe10
13 value ranges
  • 0–9 Closed
  • 10–19 Open
  • 20–29 Closed
  • 30–118 ShutterStrobe · min 0.31–32.6 Hz
  • 119–119 ShutterStrobe · max 33 Hz
  • 120–148 StrobePulseOpen · min 0.02–7.72 Hz
  • 149–149 StrobePulseOpen · max 8 Hz
  • 150–178 StrobePulseClose · min 0.02–7.72 Hz
  • 179–179 StrobePulseClose · max 8 Hz
  • 180–204 StrobeRandom Dim ON
  • 205–229 StrobeRandom Dim OFF
  • 230–234 ColorEffect strobe 0.5–30 Hz
  • 235–255 Open
2Dimmer00–255
3Red2250–255
4Green2550–255
5Blue2000–255
6White2550–255

Use the DTS Lighting Fos 100 Power Jerome L VLS in HitLight

  1. Open Add fixture and search for DTS Lighting Fos 100 Power Jerome L VLS.
  2. Choose the DMX mode set in the fixture’s own menu. HitLight gives it the lowest free start address on its universe that fits the mode’s channel count.
  3. Check the mode and controls against your real fixture before live use.

Charts come from the fixture’s GDTF description as converted for the HitLight library. HitLight is not affiliated with DTS Lighting.

Patch it, then let the music run the lights.

HitLight finds these fixtures in its library, patches them on the next free address and previews your rig in 3D before a single light is plugged in.

Open HitLight ↗Download HitLight