Skip to content
HitLight
GLP · Moving head

GLP impression X4 S

DMX chart, 1 DMX mode and a 3D preview. 19 DMX channels.

GLP impression X4 S rendered in HitLight

What it can do

  • Zoom
  • Extra LED colours
  • RGB colour mixing
  • Strobe
  • Dimmer
  • Pan and tilt

Safety-relevant functions: Fixture reset. Check how these behave on your own fixture before a show.

DMX modes and channel charts

DMX modes of GLP impression X4 S
ModeChannelsIn HitLight
Extended Mode 19CH19Ready in HitLight

Extended Mode 19CH

Ready in HitLight

19 DMX channels · Download this chart as CSV

DMX channel chart for Extended Mode 19CH
ChannelFunctionDefaultDMX values
1Pan1280–255
2Pan Fine0Fine byte of Pan
3Tilt1280–255
4Tilt Fine0Fine byte of Tilt
5Red255
5 value ranges
  • 0–62 0%
  • 63–126 25%
  • 127–190 50%
  • 191–254 75%
  • 255–255 100%
6Red Fine255Fine byte of Red
7Green255
5 value ranges
  • 0–62 0%
  • 63–126 25%
  • 127–190 50%
  • 191–254 75%
  • 255–255 100%
8Green Fine255Fine byte of Green
9Blue255
5 value ranges
  • 0–62 0%
  • 63–126 25%
  • 127–190 50%
  • 191–254 75%
  • 255–255 100%
10Blue Fine255Fine byte of Blue
11White0
5 value ranges
  • 0–62 0%
  • 63–126 25%
  • 127–190 50%
  • 191–254 75%
  • 255–255 100%
12White Fine0Fine byte of White
13Shutter / Strobe0
27 value ranges
  • 0–15 Closed
  • 16–31 Pulse RNDM · RNDM > 0.008–0.488 Hz
  • 32–46 Pulse RNDM · RNDM >> 0.52–0.968 Hz
  • 47–47 Pulse RNDM · RNDM >>> 1 Hz
  • 48–63 Pulse Open RNDM >
  • 64–78 Pulse Open RNDM >>
  • 79–79 Pulse Open RNDM >>>
  • 80–95 Pulse Close RNDM >
  • 96–110 Pulse Close RNDM >>
  • 111–111 Pulse Close RNDM >>>
  • 112–127 Pulse Open Close RNDM >
  • 128–142 Pulse Open Close RNDM >>
  • 143–143 Pulse Open Close RNDM >>>
  • 144–171 Strobe RNDM >
  • 172–198 Strobe RNDM >>>
  • 199–199 Strobe RNDM >>
  • 200–203 Strobe Sync · 1 Hz 1–1.69 Hz
  • 204–207 Strobe Sync · 2 Hz 1.92–2.62 Hz
  • 208–211 Strobe Sync · 3 Hz 2.85–3.54 Hz
  • 212–215 Strobe Sync · 4 Hz 3.77–4.46 Hz
  • 216–219 Strobe Sync · 5 Hz 4.69–5.38 Hz
  • 220–224 Strobe Sync · 6 Hz 5.62–6.54 Hz
  • 225–229 Strobe Sync · 7 Hz 6.77–7.69 Hz
  • 230–234 Strobe Sync · 8 Hz 7.92–8.85 Hz
  • 235–238 Strobe Sync · 9 Hz 9.08–9.77 Hz
  • 239–239 Strobe Sync · 10 Hz 10 Hz
  • 240–255 Open
14Dimmer0
5 value ranges
  • 0–62 0%
  • 63–126 25%
  • 127–190 50%
  • 191–254 75%
  • 255–255 100%
15Dimmer Fine0Fine byte of Dimmer
16Zoom0
3 value ranges
  • 0–127 Wide
  • 128–254 Medium
  • 255–255 Narrow
17Control10
3 value ranges
  • 0–99 Pattern Block 1 -> channel 18
  • 100–249 PWM
  • 250–255 Reset
18Pattern0
3 value ranges
  • 0–2 No pattern
  • 3–253 250 pre-defined patterns
  • 254–255 Activates direct access to LED Pattern
19Pattern Byte100–255

Use the GLP impression X4 S in HitLight

  1. Open Add fixture and search for GLP impression X4 S.
  2. Choose the DMX mode set in the fixture’s own menu. HitLight gives it the lowest free start address on its universe that fits the mode’s channel count.
  3. Check the mode and controls against your real fixture before live use.

Venues with the GLP impression X4 S

Their saved rigs list this fixture model. Confirm the current equipment with the venue.

Charts come from the fixture’s GDTF description as converted for the HitLight library. HitLight is not affiliated with GLP.

Patch it, then let the music run the lights.

HitLight finds these fixtures in its library, patches them on the next free address and previews your rig in 3D before a single light is plugged in.

Open HitLight ↗Download HitLight