Skip to content
HitLight
Showtec · Spot

Showtec Infnity TF-300 Fresnel

DMX chart, 3 DMX modes and a 3D preview. 1 / 3 / 4 DMX channels.

What it can do

  • Zoom
  • Strobe
  • Dimmer

Safety-relevant functions: Fixture reset · Service functions · Strobe. Check how these behave on your own fixture before a show.

DMX modes and channel charts

DMX modes of Showtec Infnity TF-300 Fresnel
ModeChannelsIn HitLight
1 Channel (Dimmer)1Ready in HitLight
3 Channel (Basic)3Ready in HitLight
5 Channel (Pro)4Ready in HitLight

1 Channel (Dimmer)

Ready in HitLight

1 DMX channel · Download this chart as CSV

DMX channel chart for 1 Channel (Dimmer)
ChannelFunctionDefaultDMX values
1Dimmer0
2 value ranges
  • 0–254 Closed
  • 255–255 Open

3 Channel (Basic)

Ready in HitLight

3 DMX channels · Download this chart as CSV

DMX channel chart for 3 Channel (Basic)
ChannelFunctionDefaultDMX values
1Dimmer0
2 value ranges
  • 0–254 Closes
  • 255–255 Open
2Shutter / Strobe250
3 value ranges
  • 0–5 Closed
  • 6–249 Strobe - low to high
  • 250–255 Open
3Zoom1270–255

5 Channel (Pro)

Ready in HitLight

4 DMX channels · Download this chart as CSV

DMX channel chart for 5 Channel (Pro)
ChannelFunctionDefaultDMX values
1Dimmer0
2 value ranges
  • 0–254 Closes
  • 255–255 Open
2Dimmer Fine0Fine byte of Dimmer
3Shutter / Strobe250
3 value ranges
  • 0–5 Closed
  • 6–249 Strobe - low to high
  • 250–255 Open
4Control18
28 value ranges
  • 0–7 No Function
  • 8–15 Linear
  • 16–23 Gamma 2-0
  • 24–31 Gamma 2-2
  • 32–39 S-Curve
  • 40–47 Auto
  • 48–55 Slow
  • 56–63 Medium
  • 64–71 Fast
  • 72–103 No Function
  • 104–111 1-1kHz
  • 112–119 1-2kHz
  • 120–127 1-3kHz
  • 128–135 1-4kHz
  • 136–143 1-5kHz
  • 144–151 1-6kHz
  • 152–159 Calibration disabled
  • 160–167 Calibration enabled
  • 168–175 Silent
  • 176–183 Auto
  • 184–191 Full
  • 192–199 Auto OFF
  • 200–207 ON
  • 208–223 No Function
  • 224–231 Reset Motor
  • 232–249 No Function
  • 250–250 Reset All
  • 251–255 No Function

Use the Showtec Infnity TF-300 Fresnel in HitLight

  1. Open Add fixture and search for Showtec Infnity TF-300 Fresnel.
  2. Choose the DMX mode set in the fixture’s own menu. HitLight gives it the lowest free start address on its universe that fits the mode’s channel count.
  3. Check the mode and controls against your real fixture before live use.

Charts come from the fixture’s GDTF description as converted for the HitLight library. HitLight is not affiliated with Showtec.

Patch it, then let the music run the lights.

HitLight finds these fixtures in its library, patches them on the next free address and previews your rig in 3D before a single light is plugged in.

Open HitLight ↗Download HitLight