Skip to content
HitLight
StairVille · LED bar

StairVille LED Bar 252 Wip

DMX chart, 1 DMX mode and a 3D preview. 11 DMX channels.

StairVille LED Bar 252 Wip rendered in HitLight

What it can do

  • Strobe
  • Dimmer
  • Pixel control

DMX modes and channel charts

DMX modes of StairVille LED Bar 252 Wip
ModeChannelsIn HitLight
11 CH11Ready in HitLight

11 CH

Ready in HitLight

11 DMX channels · Download this chart as CSV

DMX channel chart for 11 CH
ChannelFunctionDefaultDMX values
1Dimmer255
2 value ranges
  • 0–254 Zero
  • 255–255 Full
2Shutter / Strobe0
2 value ranges
  • 0–4 OFF
  • 5–255 Strobe from slow to fast
3Red255
2 value ranges
  • 0–254 Zero
  • 255–255 Full
4Green255
2 value ranges
  • 0–254 Zero
  • 255–255 Full
5Blue255
2 value ranges
  • 0–254 Zero
  • 255–255 Full
6Red255
2 value ranges
  • 0–254 Zero
  • 255–255 Full
7Green255
2 value ranges
  • 0–254 Zero
  • 255–255 Full
8Blue255
2 value ranges
  • 0–254 Zero
  • 255–255 Full
9Red255
2 value ranges
  • 0–254 Zero
  • 255–255 Full
10Green255
2 value ranges
  • 0–254 Zero
  • 255–255 Full
11Blue255
2 value ranges
  • 0–254 Zero
  • 255–255 Full

Use the StairVille LED Bar 252 Wip in HitLight

  1. Open Add fixture and search for StairVille LED Bar 252 Wip.
  2. Choose the DMX mode set in the fixture’s own menu. HitLight gives it the lowest free start address on its universe that fits the mode’s channel count.
  3. Check the mode and controls against your real fixture before live use.

Charts come from the fixture’s GDTF description as converted for the HitLight library. HitLight is not affiliated with StairVille.

Patch it, then let the music run the lights.

HitLight finds these fixtures in its library, patches them on the next free address and previews your rig in 3D before a single light is plugged in.

Open HitLight ↗Download HitLight