Skip to content
HitLight
ETC · PAR

ETC Source 4WRD Color II

DMX chart, 1 DMX mode and a 3D preview. 6 DMX channels.

ETC Source 4WRD Color II rendered in HitLight

What it can do

  • Extra LED colours
  • RGB colour mixing
  • Dimmer

DMX modes and channel charts

DMX modes of ETC Source 4WRD Color II
ModeChannelsIn HitLight
6CH6Ready in HitLight

6CH

Ready in HitLight

6 DMX channels · Download this chart as CSV

DMX channel chart for 6CH
ChannelFunctionDefaultDMX values
1Dimmer00–255
2Red00–255
3Green00–255
4Blue00–255
5Amber00–255
6Shutter / Strobe0
3 value ranges
  • 0–0 No strobe
  • 1–254 Strobe linear increase 1 to 33 per second
  • 255–255 No strobe

Use the ETC Source 4WRD Color II in HitLight

  1. Open Add fixture and search for ETC Source 4WRD Color II.
  2. Choose the DMX mode set in the fixture’s own menu. HitLight gives it the lowest free start address on its universe that fits the mode’s channel count.
  3. Check the mode and controls against your real fixture before live use.

Venues with the ETC Source 4WRD Color II

Their saved rigs list this fixture model. Confirm the current equipment with the venue.

Charts come from the fixture’s GDTF description as converted for the HitLight library. HitLight is not affiliated with ETC.

Fixture model: gdtf-etc-source-4wrd-color-ii-210211041
Original HitLight model built from local primitives. Manufacturer drawings/photos used as dimensional and visual references only; no third-party geometry or photo textures incorporated. Approximate planning model; not hardware verified.
Creator: HitLight

Patch it, then let the music run the lights.

HitLight finds these fixtures in its library, patches them on the next free address and previews your rig in 3D before a single light is plugged in.

Open HitLight ↗Download HitLight