Skip to content
HitLight
GLP · PAR

GLP KNV Dot - Single (Only Depence)

DMX chart, 1 DMX mode and a 3D preview. 10 DMX channels.

GLP KNV Dot - Single (Only Depence) rendered in HitLight

What it can do

  • Extra LED colours
  • RGB colour mixing
  • Strobe

Safety-relevant functions: Strobe. Check how these behave on your own fixture before a show.

DMX modes and channel charts

DMX modes of GLP KNV Dot - Single (Only Depence)
ModeChannelsIn HitLight
Mode 710Ready in HitLight

Mode 7

Ready in HitLight

10 DMX channels · Download this chart as CSV

DMX channel chart for Mode 7
ChannelFunctionDefaultDMX values
1Shutter / Strobe0
10 value ranges
  • 0–4 Shutter Closed
  • 5–39 Sync Ramp up Slow -> fast
  • 40–74 Sync Ramp Down Slow -> Fast
  • 75–109 Sync Ramp up-down Slow->Fast
  • 110–144 Sync doble flash slow >fast
  • 145–179 Pixel Flare effect slow->fast
  • 180–214 Rnd Strobe Slow > Fast
  • 215–249 Sync Strobe 0:289 > 16:67hz
  • 250–252 Hyperspeed
  • 253–255 Open
2Control100–255
3Red00–255
4Red Fine0Fine byte of Red
5Green00–255
6Green Fine0Fine byte of Green
7Blue00–255
8Blue Fine0Fine byte of Blue
9White00–255
10White Fine0Fine byte of White

Use the GLP KNV Dot - Single (Only Depence) in HitLight

  1. Open Add fixture and search for GLP KNV Dot - Single (Only Depence).
  2. Choose the DMX mode set in the fixture’s own menu. HitLight gives it the lowest free start address on its universe that fits the mode’s channel count.
  3. Check the mode and controls against your real fixture before live use.

Charts come from the fixture’s GDTF description as converted for the HitLight library. HitLight is not affiliated with GLP.

Patch it, then let the music run the lights.

HitLight finds these fixtures in its library, patches them on the next free address and previews your rig in 3D before a single light is plugged in.

Open HitLight ↗Download HitLight